Maker Pro
Maker Pro

how to stick read write cycle in SRAM

I want control the read and write (SRAM single data port AT60142) with
but I want stick a read cycle and write cycle in the SAME adress See

CS ----\_________________/------
RD ----\_______/-----------------
WR -----------------\________/-----------
data ----Z--<--data-->Z

The data sheet indicate the data still on the bus 8ns after the RD
raising edge.
But i m problem with (tGHQZ : time OE high to high Z)
I think, i can't write with WR falling edge juste after read.
According your experience
Can I do that?