Maker Pro
Maker Pro

how to store something

Adi

Sep 15, 2012
2
Joined
Sep 15, 2012
Messages
2
how to store some info in the form of electrons in any jar or container and the extract it and again it can be saved but condition is won't use any chips or tools built by other you have to build everything on your own.


PLEASE HELPPPP........
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
12,607
Joined
Nov 17, 2011
Messages
12,607
You can use any capacitor. The voltage across a capacitor is a measure of the charge stored within the capacitor: V=Q/C
where
V=voltage
Q=charge
C=capacitance

Theoretically you can store charge in chunks as small as on electron. Practically, due to tolerances, you need a change of a few tens or hindreds of millivolts to reliably discern different charge states of the capacitor. But a few states (e.g. 0, 1/4, 1/2, 3/4 and full charge) should be storable in one capacitor making 2 bit in this example.

This is similar to how information is stored in a multilevel FLASH memory cell.
 
Top