Maker Pro
Maker Pro

How to wind isolation transformer by impedence matching?

Status
Not open for further replies.

russwr

Dec 20, 2019
15
Joined
Dec 20, 2019
Messages
15
Need help to wind wire on yellow/white khz toroid core to match power inverter output to ISOLATION TRANSFORMER to 4 ohm load and higher 32 volts AC output. Inverter is 20,000 cycles, 16v AC, about 200 watts, about .063ohm resistance impedence on contacts with below 1 microhenry inductance secondary side. (Several attempts not going over 15 volts out on high frequency analog multimeter)
 
Status
Not open for further replies.
Top