Maker Pro
Maker Pro

I broke my cassette aux adapter

gogsata

Feb 22, 2023
2
Joined
Feb 22, 2023
Messages
2
The cable of my cassette aux adapter (LLCD555C) got pulled and disconnected all the wiring.
I have a 3.5mm audio jack with 2 black wires. Inside one of them is a red cable and an uninsulated cooper cable. Inside the second one there is a white cable and an uninsulated cooper cable.

The cassette tape head has 4 pins. in the top left pin there is a resistor soldered to it and the remaining 3 pins have nothing.
Am I missing components and if not how should I connect them?
 

Bluejets

Oct 5, 2014
6,345
Joined
Oct 5, 2014
Messages
6,345
Show photos (clear and good size)...i.e. check them before you post them.
 

gogsata

Feb 22, 2023
2
Joined
Feb 22, 2023
Messages
2
There are no symbols on the tape head apart from the ones on the circuit board.

20230223_084926.jpg20230223_084952.jpg20230223_085015.jpg
 
Last edited:
Top