Maker Pro
Maker Pro

I have dji mavic pro gimbal and camera help me wiring it so that i could use it as separate camera

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
Hi, do you want to remove the camera from the gimball?
It depends whether the cameras supporting electronics is in the housing or integrated with the gimbal electronics.
Check how many wires are coming from the camera. Generally, 3 wires are power and video, 4 wires are power, video and audio. I assume the camera housing doesn't pan and tilt, the gimbal does this?.

Martin
 

Giorgikakha

Apr 14, 2021
3
Joined
Apr 14, 2021
Messages
3
No i dont want to remove the canera i want to use it all as gimbal and camera . Is therr any kind of board which connects to this pins ?
 

Attachments

  • 6852A3C6-7D52-4F3E-97A8-1004874C7E19.jpeg
    6852A3C6-7D52-4F3E-97A8-1004874C7E19.jpeg
    142.8 KB · Views: 5
  • E8205315-727C-479B-A632-15EA8A6CF6D0.jpeg
    E8205315-727C-479B-A632-15EA8A6CF6D0.jpeg
    272.5 KB · Views: 5

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
I dare say they are proprietary and only DJI use them.
You could count the pins and measure the pin spacings along with the connector dimensions. That may give you a start for an internet search.
But I'd probably find a dedicated forum for drones where people hack and pull them a part.
Other members here on EP May have better answers for you.

Martin
 

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
I must say though, they do look very similar to iPhone 5 connectors. Obviously not.
Have you got the drone?, you could possibly trace the important connections. Leaving all ancillary connections out.

Martin
 
Top