Maker Pro
Maker Pro

I have issues with MAKE: Electronics experiment 8? (The link may not work so tell me

Status
Not open for further replies.

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
Tell me if this video is correct:

"The page you requested cannot be displayed at the moment. It may be temporarily unavailable, the link you clicked on may have expired, or you may not have permission to view this page."
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
It looks right. The LED flashing is what I expect.

I wasn't sure when I looked at the video whether you were touching something to make it go on and off or whether it was doing it itself.

If the LED still glows then it's working (to answer a question you asked on the video)
 

nyancatvsghosthead

Jan 7, 2012
117
Joined
Jan 7, 2012
Messages
117
Thank you. Thank you so much. Now, I can move on to the next experiment. Thanks. =) I will look at that web page you sent me too. Thanks. :)
 

jackorocko

Apr 4, 2010
1,284
Joined
Apr 4, 2010
Messages
1,284
I wasn't sure when I looked at the video whether you were touching something to make it go on and off or whether it was doing it itself.

does look like he is pushing a button
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
You shouldn't have been. The relay should have been doing that all by itself.
 

KrisBlueNZ

Sadly passed away in 2015
Nov 28, 2011
8,393
Joined
Nov 28, 2011
Messages
8,393
OMFG Steve and Laplace you guys are paragons of patience! It's like you're teaching someone to play a Beethoven concerto with Morse code as the only communication medium!
 
Last edited by a moderator:
Status
Not open for further replies.
Top