Maker Pro
Maker Pro

I just finished a monitoring program for use with PVM1010

I have a PVPowered PV5200 with a PVM1010 attached to the comm port. That
device is accessible from your own subnet for sure. I have not been
able to test it off my own subnet yet. More on that later, if it works.

This program has a display showing current stats and, each minute,
updates that display and saves the important data to a .CSV file which
you can later graph.

This is version 1 and is certain to grow up and become something at
least a little larger than it is now.

If you have a PVM1010, I can share the program. It works and I would
love to have comments for features and functions beyond what it does
now.

This should work with any of the models at the end of this post with a
PVM1010 attached. This is, of course, freeware. I cannot release any
of the internal details due to a non-disclosure I signed but can
distribute the program as far as I know.

Mike Morrow -- mike *at) ILikeTheInternet *dot( com
You know what to do to make a real email address but I hope the spambots
DON'T!! I get more than enough junk mail already!!

Here is a list of units the PVM1010 and this program should work with.
PVP 1100
PVP 1800
PVP 2800 - 208
PVP 2800 - 240
PVP 2800XV
PVP 2000
PVP 3200
PVP 2900
SPR 2000
SPR 3200
SPR 2900
PVP 5200
PVP 4600
SPR 5200
SPR 4600
PVP 2500
PVP 3500
PVP 4800
SPR 2500
SPR 3500
SPR 4800
PVP 5200
PVP 4600
SPR 5200
SPR 4600
PVP 2500
PVP 3500
PVP 4800
SPR 2500
SPR 3500
SPR 4800
 
Top