Maker Pro
Maker Pro

I need advice on how to solder these 12 fuses in this power inverter

William workmas

Jun 9, 2022
1
Joined
Jun 9, 2022
Messages
1
When I got this invertor all fuses were blown I went ahead a gave it a shot removing them and I'm just wondering how much solder do I remove and what's the best method of soldering them back in since I'm a novice and Ive never seen this type of soldering where it flooded on top of the board thank you in advance for you're help
 

Bluejets

Oct 5, 2014
5,985
Joined
Oct 5, 2014
Messages
5,985
Here's a tip....... I have a car, so can you tell me make, model and year of manufacture...???

Post some photos....
 

kellys_eye

Jun 25, 2010
5,095
Joined
Jun 25, 2010
Messages
5,095
all fuses were blown
That'll be why the inverter was 'junked' - simply replacing the fuses will only mean you having to buy MORE fuses as they'll just blow again unless you discover WHY they blew in the first place.
 
Top