Maker Pro
Maker Pro

I need Software Adjustments Parameters: RCA CTC203

S

SB20

Jan 1, 1970
0
Got the set back in place, but need to adjust some of the service menu
parameters (Menu&Power, Vol+). Could someone please post this list? Also
are there recomended setting for these?

Thanks! everyone has been great...I can see the finishline now!

Steve
 
R

RonKZ650

Jan 1, 1970
0
What adjustments are you trying to do? I wouldn't recommend doing
anything without the Chippercheck setup hooked to a computer.
 
S

SB20

Jan 1, 1970
0
Resizing it vertically and horizontally and shifting it into place. The
corners also are a bit rounded/"pulled"

I am also seeing some movement in the picture when the light levels
change. I really notice it with the graphics on TV.

Steve
 
K

kip

Jan 1, 1970
0
If the corners are rounded as you say Fix the TV,s
fault first before playing around with the service menu,s.

kip
 
Top