Maker Pro
Maker Pro

ic number not visible in (smps)

seekerofknowledge

Nov 6, 2012
4
Joined
Nov 6, 2012
Messages
4
Hi Friend/z

I am new to this forum and i hope i will get some help to this problem.

I have a computer power supply Compaq, Product of china, Series PDP 118.

The problem is there is one broken ic in which the number is not visible to replace it so i want that number or equivalent one.

here i will upload images of that power supply

http://imageshack.us/photo/my-images...icture2oi.jpg/
http://imageshack.us/photo/my-images...icture3hc.jpg/
http://imageshack.us/photo/my-images/19/picture4pu.jpg/
http://imageshack.us/photo/my-images...icture5jx.jpg/
http://imageshack.us/photo/my-images...icture6pa.jpg/
http://imageshack.us/photo/my-images...icture7hc.jpg/
http://imageshack.us/photo/my-images...icture8gd.jpg/


That ic is in primary section

There is one more good similar ic the number of that ic is

J242
TOP243Y
21041C

IMAGE OF THAT GOOD IC IS http://imageshack.us/photo/my-images/19/picture4pu.jpg/


THX IN ADVANCE
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
Once you get to that image (I gave up before I got there the first time) you can go forward and back to see the other images. However, none are of any use.

The photos need to be sharp and we must be able to read what's on the devices.
 

seekerofknowledge

Nov 6, 2012
4
Joined
Nov 6, 2012
Messages
4
Once you get to that image (I gave up before I got there the first time) you can go forward and back to see the other images. However, none are of any use.

The photos need to be sharp and we must be able to read what's on the devices.

sir i do not have high definition cam with me, that is why images are not clear, and i have uploaded these images only for indication, i can provide you all the component number's and other details if you require, i already mentioned the transistor number if you want me to mention other also i can mention it pls.
 

CocaCola

Apr 7, 2012
3,635
Joined
Apr 7, 2012
Messages
3,635
sir i do not have high definition cam with me

You don't need a high res camera, you simply need to spend some time getting better pictures... If the camera can't focus up close take a step back and let it focus... Add more light so it can focus easier, outside during full sun is an optimal time to take pictures... An out of focus photo is just about useless, a less zoomed in, in focus photo is far more beneficial... Especially if you can comment the part numbers that are not visible...

Try taking a step or two back, take an in focus photo even if it's not tightly focused to one area...
 
Top