G
Geoff Sale
- Jan 1, 1970
- 0
I just received 5 new TMS3617NS keyers, but cannot install them in the
original 28-pin sockets as the new ones have a 2mm pin pitch rather than
the standard 0.1".
The old IC's measure 1.5" x 0.61" outside, while the new ones are 0.98"
x 0.42" (25mm x 11mm).
Does anyone know of an available converter socket I can use to plug the
smaller new IC's into which will then fit into the original 'standard'
28-pin sockets? Thanks,
Geoff
original 28-pin sockets as the new ones have a 2mm pin pitch rather than
the standard 0.1".
The old IC's measure 1.5" x 0.61" outside, while the new ones are 0.98"
x 0.42" (25mm x 11mm).
Does anyone know of an available converter socket I can use to plug the
smaller new IC's into which will then fit into the original 'standard'
28-pin sockets? Thanks,
Geoff