Maker Pro
Maker Pro

IDC d-sub with no "ears"

Hi gang,
I'm looking for a male 25 pin d-sub IDC connector that doesn't have
the ears for mounting hardware. I know if I use a plastic shell part I
can trim off the ears but I'm hoping there's a part out there that has
no ears...
(Or whatever those little things with the holes in them are called).
And no, you can't just snap off the metal ones, the ears are what are
holding the two stamped metal parts together.
Thanks!
 
L

Lostgallifreyan

Jan 1, 1970
0
[email protected] wrote in
Hi gang,
I'm looking for a male 25 pin d-sub IDC connector that doesn't have
the ears for mounting hardware. I know if I use a plastic shell part I
can trim off the ears but I'm hoping there's a part out there that has
no ears...
(Or whatever those little things with the holes in them are called).
And no, you can't just snap off the metal ones, the ears are what are
holding the two stamped metal parts together.
Thanks!

I think you already have the answer, trimming plastic ones, or maybe some
metal ones use a crimped shell to avoid a two-part assembly so you can cut
those without them falling apart. I thought the D connector's spec included
the ability to use bolts to retain a connection, so I don't think there is
any other kind. I've never seen one, anyway. I've seen many diverse forms
of them, but they all inlude those lugs for bolt retention.
Some will be easier to adapt than others, so take your pick.
 
Top