Maker Pro
Maker Pro

Ideas for a replacement PSU?

protech

Oct 2, 2010
6
Joined
Oct 2, 2010
Messages
6
Hi,

I am trying to find a PSU with the following outputs (or as near as practical).
It is for an ECHO Audio Fire 12. The PSU in it has failed and I can't find an
exact replacment for it. UMEC do have similar, but don't have this exact model.
The PSU about an inch high as it goes in the ECHO unit (which is 1U). But
I would be happy for any recomendations of a PSU I can purchase that can
supply these voltages?

The spec states that it supplies the following.
+18Vdc @ 0.3A
+6.75Vdc @ 2A
-18Vdc @ 0.3A

Part number: UMEC UP0303S-0551

Many thanks :)

PT
 

ayush

Oct 31, 2010
15
Joined
Oct 31, 2010
Messages
15
with this kind of audio gear that needs precisely regulated supply i wouldn't suggest you to make a DIY power supply. u could use lab power supplies, but that would be inconvenient to use for 3 different voltages.

did u try fixing the old one?
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
Hi,
I am trying to find a PSU with the following outputs (or as near as practical).
It is for an ECHO Audio Fire 12. The PSU in it has failed and I can't find an
exact replacment for it. UMEC do have similar, but don't have this exact model.
The PSU about an inch high as it goes in the ECHO unit (which is 1U). But
I would be happy for any recomendations of a PSU I can purchase that can
supply these voltages?
The spec states that it supplies the following.
+18Vdc @ 0.3A
+6.75Vdc @ 2A
-18Vdc @ 0.3A
Part number: UMEC UP0303S-0551
Many thanks :)
PT

Hi there
what problems do you have with the original unit ? symptoms ?

Dave
 
Top