Maker Pro
Maker Pro

Identify this component please.

stoveitin

Jul 3, 2013
16
Joined
Jul 3, 2013
Messages
16
Hello,

Im in the middle of repairing and playing with this board but cant identify this component I think its some sort of filter its in line with the audio circuit to an op amp input...

I have attached a photo of it to this post with the component circled in red.

Its hard to read the information on it .. looks like .. 2a1u3x .. maybe and has two leads too it.

Cheers for any help.
 

Attachments

  • green component2.jpg
    green component2.jpg
    33.1 KB · Views: 160
Last edited:

stoveitin

Jul 3, 2013
16
Joined
Jul 3, 2013
Messages
16
ahh really I been googleing capacitors for ages trying to identify it, I cant make sense of the markings on it and its marked on the board as a X not as C1 for example.
 

stoveitin

Jul 3, 2013
16
Joined
Jul 3, 2013
Messages
16
Guess the end of the markings could really be 103x 10000pf X tolerance ?
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
It looks like a 0.1uF greencap (if your reading is correct). It's a capacitor, and it may be used in the filtering of an audio signal, but unless you can trace the wiring around it there is no way to know what sort of filter it is part of (if indeed it is part of a filter)

Could that letter be a "K"?

See here.
 

stoveitin

Jul 3, 2013
16
Joined
Jul 3, 2013
Messages
16
Okay yea I see now cheers for your help on something I probably should of recognised easier lol.

2A = 100volts
103= 0.01 uf
x could possibly be a k its pretty worn and hard to read which would just be the tolerance.

I have worked the whole circuit out I have attached a picture of where abouts it is in the circuit but im happy now :).

Thx for your help.
 

Attachments

  • circuit2.jpg
    circuit2.jpg
    23.9 KB · Views: 133
Top