Maker Pro
Maker Pro

Identify this resistor?

fishbak

Sep 12, 2022
1
Joined
Sep 12, 2022
Messages
1
Hi, I need to replace this. Can anybody please tell me what I need. Many thanks.
 

Attachments

  • resistor.PNG
    resistor.PNG
    236.2 KB · Views: 7

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
Hi, I need to replace this.
...based on what assumption? It looks perfectly ok and 'damaged' resistors are usually visibly damaged. It should measure 10 ohms and 1% tolerance (if the colours are brown and black - they could be red, in which case this will mean 20 ohms and 2% tolerance).

Of course, you may be replacing it for other reasons - which I can't fathom with just the information provided - but if you are trying to repair a fault then post more details as you may be labouring under a misunderstanding.
 
Top