Maker Pro
Maker Pro

Identifying equivalent for surface mount diode from photo

Narna Peel

Sep 16, 2017
3
Joined
Sep 16, 2017
Messages
3
Hi
Please would someone advise me on an axial replacement for the surface mount diode shown in this photo.
Also would you confirm that the resistors shown in the photo can be replaced with an axial 470 ohm resistors.
Thank you
Narna

Diode.jpg
 

kellys_eye

Jun 25, 2010
5,305
Joined
Jun 25, 2010
Messages
5,305
The diode can be replaced with a standard 1N4004 and any axial resistor will replace the fixed values SMD device (check the wattage - can't make out what size package those resistors are but the equivalent may be 1/4 watt or 1/2 watt...)
 

Narna Peel

Sep 16, 2017
3
Joined
Sep 16, 2017
Messages
3
The diode can be replaced with a standard 1N4004 and any axial resistor will replace the fixed values SMD device (check the wattage - can't make out what size package those resistors are but the equivalent may be 1/4 watt or 1/2 watt...)

Brilliant, thank you.

kellys_eye, would agree with davenn that the resistors are actualy 47 ohms and not 470 ohms as i thought?
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,507
Joined
Jan 21, 2010
Messages
25,507
kellys_eye, would agree with davenn that the resistors are actualy 47 ohms and not 470 ohms as i thought?

The fact that nobody has contradicted Dave is probably a good indication.
 

Narna Peel

Sep 16, 2017
3
Joined
Sep 16, 2017
Messages
3
Ha ha, sorry Dave, I did not mean to insult you.
I appreciate your knowledge, it has just saved me a lot of time.
 

kellys_eye

Jun 25, 2010
5,305
Joined
Jun 25, 2010
Messages
5,305
If my opinion is that highly valued :p and it winds @davenn up a little then yes, it's a 47Ω resistor!
 
Top