Maker Pro
Maker Pro

Illuminated Rocker Switch-SPST Lights or Powers not both

S

smilinfu

Jan 1, 1970
0
I am trying to use a Radio Shack illuminated rocker switch. It has 3
terminals. Unfortunately I can have it work successfully as a power
switch, or I can have it light up, but have not figured out how to
wire it so both happen at the same time. Radio Shack has no
information on their site, nor does Mountain switch that makes an
almost identical switch. Can any body help with this? I have the
mains power coming in to the box, on pole going through a fuse and the
switch and then both poles going to the power transformer.
I have searched and found a couple threads talking about the problem,
but non that have helped me solve my problem. Though I might ask
before experimenting with the mains


Thanks,
smilinfu
 
R

Rich Grise

Jan 1, 1970
0
smilinfu said:
I am trying to use a Radio Shack illuminated rocker switch. It has 3
terminals. Unfortunately I can have it work successfully as a power
switch, or I can have it light up, but have not figured out how to
wire it so both happen at the same time. Radio Shack has no
information on their site, nor does Mountain switch that makes an
almost identical switch. Can any body help with this? I have the
mains power coming in to the box, on pole going through a fuse and the
switch and then both poles going to the power transformer.
I have searched and found a couple threads talking about the problem,
but non that have helped me solve my problem. Though I might ask
before experimenting with the mains

Go to the RS store, and get the schematic off the back of the bubble-pack
of a new one.

It's probably (A) one common (i.e. one side of the switch and one side
of the lamp to one terminal), (B) the other side of the switch, and
(C) the other side of the lamp.

But without more information, we'd be just guessing.

Good Luck!
Rich
 
Top