Maker Pro
Maker Pro

"In Your Pocket" voice keychain editing?

PsycoEmu

Dec 30, 2013
1
Joined
Dec 30, 2013
Messages
1
I've never truly messed with circuit boards or anything, but I have a general understanding of powering a circuit. My question, or project I'd like to start on, is editing the audio files on this keychain, or basically upload completely different files.
IMAG1056.jpg
I'm not sure how to go about that. I'd like to not have to completely remove the equipment, if possible. Here's what the actual circuit board looks like.
IMAG1057.jpg
Any thoughts?
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
What you do is:

1) Go to you local travel agent
2) Purchase a return ticket to China
3) take this device, your music, and lots of money
4) Find someone to take your money, encode your music, and make a chip that they will then put on a board similar to this one.

Note for step (4): the first part of this is easy.

The sound recorded on those chips (it's under the black blob) is not erasable and re-recordable.
 
Top