Electro132
- Feb 12, 2013
- 261
- Joined
- Feb 12, 2013
- Messages
- 261
Hi,
I'm needing help in increasing current from a 1.5 V batt by placing down 3x 100 ohm resistors in parallel circuit with an output. However, i have encountered a problem and found that the resistors (even though they each have their own line) tend to give out about 0.3 A of current each but this is also the same amount for the total output. It is supposed to be 0.9 A but i am getting 1.4 - 1.5 A total current output meaning something is wrong.
Can anyone help?
I'm needing help in increasing current from a 1.5 V batt by placing down 3x 100 ohm resistors in parallel circuit with an output. However, i have encountered a problem and found that the resistors (even though they each have their own line) tend to give out about 0.3 A of current each but this is also the same amount for the total output. It is supposed to be 0.9 A but i am getting 1.4 - 1.5 A total current output meaning something is wrong.
Can anyone help?