Maker Pro
Maker Pro

INDUCTION LAUNCHER I have all the parts connected and ready, just need to add new SCR/switch et al.

CLD

Jul 9, 2019
2
Joined
Jul 9, 2019
Messages
2
INDUCTION LAUNCHER
I have all the parts connected and ready, just need to add new SCR/switch et al.


The SCR at PIN 1 exploded on the first 2 tries. Tested w multimeter and determined SCR was busted.

I copied the components from this youtube vid:

I need a new SCR and perhaps a different configuration - would love some positive constructive suggestions and feedback.

ATTACHED:
Diagram of how mine is presently set up.
2 versions of the schematics from the youtube vid.
 

Attachments

  • diagram.png
    diagram.png
    156 KB · Views: 7
  • board schematic.png
    board schematic.png
    242.3 KB · Views: 7
  • schematic.png
    schematic.png
    69.5 KB · Views: 7

WHONOES

May 20, 2017
1,217
Joined
May 20, 2017
Messages
1,217
I suggest you calculate the energy your scr is being asked to cope with.
 
Top