Maker Pro
Maker Pro

Integrated Display Module Interface?

mushroom_brew

Nov 21, 2022
1
Joined
Nov 21, 2022
Messages
1
I am attempting to figure out what this display interface is called so that I can look for some sort of adapter. I'd like to use these displays for projects. The silkscreen printed next to the port shows 1-20 pins, but it actually has a total of 24. It is a push-on type of connector, which is commonly used inside laptops. Any thoughts? I wasn't able to find any information on the display itself. The model number is apparently: tm0806avfugwa. The connector is 5.5x1.8mm in size. The display measures 50x160mm, is (I think) AMOLED, and is from an appliance.
 

Attachments

  • CM221121-115650004.jpg
    CM221121-115650004.jpg
    218.6 KB · Views: 3
  • 20221121_115754.jpg
    20221121_115754.jpg
    103.2 KB · Views: 3
Top