Maker Pro
Maker Pro

Internal RTC with Raspberry PICO

Maker31659723297

Aug 24, 2022
4
Joined
Aug 24, 2022
Messages
4
Please have you programmed an internal RTC in Raspberry Pico in Arduino IDE? I would need to run the interruption from the alarm.
Than you
 

Maker31659723297

Aug 24, 2022
4
Joined
Aug 24, 2022
Messages
4
Where? I think you forgot the link Harald.

Martin
Can you show me a specific setting of the Alarm, for example, for a 5-second time interval?
With my program, reading the RTC time works without a problem, but the alarm sounds strange. The first alarm (with a 5-second setting) is triggered after 5 seconds, but the next one after one minute.
 

Maker31659723297

Aug 24, 2022
4
Joined
Aug 24, 2022
Messages
4
Can you show me a specific setting of the Alarm, for example, for a 5-second time interval?
With my program, reading the RTC time works without a problem, but the alarm sounds strange. The first alarm (with a 5-second setting) is triggered after 5 seconds, but the next one after one minute.
 

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
I agree it was always blue. But my end, your words/letters are all black.
Have a look at the screen shot.
 

Attachments

  • AF50264C-FBCE-45DD-8F2B-2D52AC8EA41D.png
    AF50264C-FBCE-45DD-8F2B-2D52AC8EA41D.png
    225.2 KB · Views: 4

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
Actually, I can see a hint of blue in the screen shot but not in the forum post itself.

Martin
 

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
Yes, your screen shot is great and obviously blue, which I can see. I also link to words as you have done. May be a glitch in the new forum?.

Martin
 
Top