Maker Pro
Maker Pro

Is someone familiar with this cable?

D

Daan

Jan 1, 1970
0
I've got an old CD Autoloader.
It's a Nistec ALW-501, i have the software for this piece of hardware,
but i don't have a cable.
The unit has a 25 pins connector.
Pins 2,3 6,7 and 20 are used on the unit.
Is anyone familiar with those pins? i need a 9 pin serial connector at
the other side, but don't know where to put which lines.
Maby this is a default cable :)
 
J

John Fields

Jan 1, 1970
0
I've got an old CD Autoloader.
It's a Nistec ALW-501, i have the software for this piece of hardware,
but i don't have a cable.
The unit has a 25 pins connector.
Pins 2,3 6,7 and 20 are used on the unit.
Is anyone familiar with those pins? i need a 9 pin serial connector at
the other side, but don't know where to put which lines.
Maby this is a default cable :)
 
T

Tom MacIntyre

Jan 1, 1970
0
I've got an old CD Autoloader.
It's a Nistec ALW-501, i have the software for this piece of hardware,
but i don't have a cable.
The unit has a 25 pins connector.
Pins 2,3 6,7 and 20 are used on the unit.
Is anyone familiar with those pins? i need a 9 pin serial connector at
the other side, but don't know where to put which lines.
Maby this is a default cable :)

No guarantees, but possibly the second one here?

http://www.jspayne.com/io/schematics.html

Tom
 
L

Lompebeer

Jan 1, 1970
0
No guarantees, but possibly the second one here?

http://www.jspayne.com/io/schematics.html

Tom

Hello Daan,

I've got also the Nistec ALW-501.....i've got the cable, but don't hav
the software. Can you please send me the software?
The cable is like in the picture a null-modem. I heard that you defenitel
need a termination block plugged into the extra "daisy-chain" SCS
connector on the back of the unit. Also, the robotics uses a "Nul
modem" configuration.

I hope this is the right information for you, but please help me with th
drivers and software, otherwise this machine is useless.

Greetings,
Ronald
 
Top