Maker Pro
Maker Pro

Is there a way to EASILY slowly extinguish a LED to mimic a incandescent bulb.

bigkim100

Apr 17, 2013
270
Joined
Apr 17, 2013
Messages
270
Is there a way to EASILY Low parts count) slowly extinguish a LED to mimic a incandescent bulb. Voltage used is 9VDC.
Thank you very much in advance
 

Alec_t

Jul 7, 2015
3,331
Joined
Jul 7, 2015
Messages
3,331
Lowest parts count would likely involve a small micro-controller. If you're a competent programmer that would be an easy option.
 

bigkim100

Apr 17, 2013
270
Joined
Apr 17, 2013
Messages
270
Im not a programmer, I was hoping for a electrolytic, and a transistor type circuit
 
Top