Maker Pro
Maker Pro

Is this ok or will it cause problems?

cleb_wood

Jul 3, 2023
7
Joined
Jul 3, 2023
Messages
7
I'm about to send my pcb off to be printed but I'm not sure if this will cause problems it is the via hole which is offset to the other hole in the image below. Could someone help?Screenshot 2023-07-11 102250.png
 

Bluejets

Oct 5, 2014
7,041
Joined
Oct 5, 2014
Messages
7,041
Usually if there is a problem, the pcb manufacturer will find it during any check.
Why make it that way to begin with?
 

cleb_wood

Jul 3, 2023
7
Joined
Jul 3, 2023
Messages
7
It says its ok in the check but I'm not sure if it will cause a problem or not
 

Bluejets

Oct 5, 2014
7,041
Joined
Oct 5, 2014
Messages
7,041
So you are saying you sent the pcb files off to the manufacturer, their techs look at it and said it is ok...correct?
 
Top