Maker Pro
Maker Pro

JVC HR-S7955 not powering on since power cut/surge

newgen2005

Sep 3, 2018
3
Joined
Sep 3, 2018
Messages
3
2 of my JVC VCR's no longer power on since we had a power cut yesterday. There must have been some sort of power surge which as killed them.

Can anyone suggest any things to check? I have checked the fuse inside the VCR and that is OK, in fact my voltage stick detects voltage all round the circuit board.
 

Attachments

  • IMG_6550.JPG
    IMG_6550.JPG
    294.5 KB · Views: 30
  • IMG_6558.JPG
    IMG_6558.JPG
    228 KB · Views: 35

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
Your voltage stick will only detect AC - the input to the primary side of the PSU. DO you have a test meter to check the OUTPUT of the power supply section?
 

newgen2005

Sep 3, 2018
3
Joined
Sep 3, 2018
Messages
3
Thank you for replying Kellys_eye. I do have a Multi Meter. Are you able to point me in the right direction? as I don't know where to start!
 
Top