C
[email protected]
- Jan 1, 1970
- 0
This unit has an open power transformer on the control board. There are
two secondaries. One goes to the display and the other goes through a
simple rectifier which has a 25V electrolytic across it. Can I assume
that these secondaries are around 30V and 12V? The control board is
PN15545. The chip is Sanyo who could be the OEM but I don't know. Any
opinions? Thanks, Lenny Stein, Barlen Electronics
two secondaries. One goes to the display and the other goes through a
simple rectifier which has a 25V electrolytic across it. Can I assume
that these secondaries are around 30V and 12V? The control board is
PN15545. The chip is Sanyo who could be the OEM but I don't know. Any
opinions? Thanks, Lenny Stein, Barlen Electronics