Maker Pro
Maker Pro

Kodak 850H Slide Projector Problem

Jim S

Mar 28, 2011
2
Joined
Mar 28, 2011
Messages
2
My Kodak 850H Slide Projector is malfunctioning. When I turn it on it begins cycling as if the forward button were being pushed and doesn't stop. Any ideas on what the problem could be?
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
Could the button be stuck? even if the button isn't, the switch it actuates may be.
 

Jim S

Mar 28, 2011
2
Joined
Mar 28, 2011
Messages
2
Thanks for the reply. When I hit the forward button I can tell it registers, so assume it's not the button itself. I you might be right about the switch that the button engages. I took off the cover and the insides were more complex then I hoped. What to do...
 

Doug Dunlap

Feb 10, 2018
3
Joined
Feb 10, 2018
Messages
3
Thanks for the reply. When I hit the forward button I can tell it registers, so assume it's not the button itself. I you might be right about the switch that the button engages. I took off the cover and the insides were more complex then I hoped. What to do...

I am trying to repair a Kodak 850h. Does anyone know of a source for the service manual?
Doug
 

73's de Edd

Aug 21, 2015
3,366
Joined
Aug 21, 2015
Messages
3,366
Sir Doug Dunlap . . . . .

INFO is just below . . .what is YOUR units specific problem ?

TECHNO REFERENCING . . . . .

KODAK_CAROUSEL_850.jpg


73's de Edd
.....
 
Last edited:

Doug Dunlap

Feb 10, 2018
3
Joined
Feb 10, 2018
Messages
3
A metal part in the cycling mechanism for a carousel came off and I can't determine where it goes without an exploded parts diagram.
Thanks,
Doug
 

Doug Dunlap

Feb 10, 2018
3
Joined
Feb 10, 2018
Messages
3
Thanks 73's de Edd but my protection software will not let me download the library software. Is there a download pdf available?
Doug
 
Top