Maker Pro
Maker Pro

Kodak Carousel Projector

xyzz

Jul 26, 2018
1
Joined
Jul 26, 2018
Messages
1
I have a Kodak Carousel Projector 760H. I have been looking at my color slides in a tray that holds 80 slides. One of them got stuck and after I pulled it out and started to view again, the forward and reverse buttons on the projector and the remote do not work. Help1
 

Tha fios agaibh

Aug 11, 2014
2,251
Joined
Aug 11, 2014
Messages
2,251
Perhaps the motor was overloaded when the slide got stuck. If your lucky theres a fuse that can be replaced.
 

Tha fios agaibh

Aug 11, 2014
2,251
Joined
Aug 11, 2014
Messages
2,251
Trouble shooting guide (see attached)says to check tray position.
 

Attachments

  • Troubleshooting_troubleshooting.pdf
    117 KB · Views: 30

KJ6EAD

Aug 13, 2011
1,114
Joined
Aug 13, 2011
Messages
1,114
The nylon gears used in that line of projectors are prone to embrittlement and breakage due to material incompatibility with the grease used to lubricate them. One symptom of breakage is inability to advance or reverse the tray position. This may or may not be the cause of failure in your case.

You can replace the grease with a nylon compatible type such as Superlube Silicone Lubricating Grease (teflon filled silicone grease), product 92003, to prevent further damage.
SYO_92003.jpg

http://www.super-lube.com/silicone-lubricating-grease-with-syncolon-ptfe-ezp-53.html
 
Last edited by a moderator:

kellys_eye

Jun 25, 2010
6,486
Joined
Jun 25, 2010
Messages
6,486
|Time to 'get modern' and have the slides professionally scanned for display on TV/PC/Tablet (and forwarding to friends/relatives etc)
 
Top