Maker Pro
Maker Pro

L298N Replacement/Alternative

Carlos144green

Nov 7, 2021
2
Joined
Nov 7, 2021
Messages
2
Hello, I have been working on a project that uses an L298N to control the speed of my 24v dc motor. The motor struggles with the power the L298N allows (~50W) and if I try to supply any more than that the L298N goes up in smoke. Are there any L298N replacements or alternatives for this board? An ideal one would be cheap, can handle 10 amp peaks, and easy to hook up.
 

Carlos144green

Nov 7, 2021
2
Joined
Nov 7, 2021
Messages
2
I just bought an IRF3205 board with a peak of 30A for 20$! I can't believe I missed it so many times searching for a good H-bridge. Thanks.

If I don't update this in a week assume everything went smoothly.
 
Top