Maker Pro
Maker Pro

Large Led display


Bill Volz

Jan 1, 1970
I have a Netbrite led display but it looks like it requires some very
expensive software to operate. I was wondering if there was a way I could
get it working without the software. Below is a link to whats left of the
web site. It has a built in ethernet connection, which works and allows me
to telnet in to it. The problem is you can only change basic settings in
there like IP address, gateway, etc.. I was wondering if anyone has seen
one of these and has any insight before I start disassembling it.


Also I tried to contact them but it seems they only deal with large high
paying customers and helping me would be an inconvience.