Maker Pro
Maker Pro

LCD Module Pinout

A

ahmed samir

Jan 1, 1970
0
hi there

i have been looking around for the datasheet or atleast the pinout for
this LCD module i got ,but no luck, ofcourse i asked at the store
where i got it ,but they have no clue

the lcd module is 40x1 lcd, with 20 pin cable-like the ide cable-and
header.

all the marking on it is:

Citizen japan, h2010h-tr


please help me i can't make any use of this module without it's pinout

ah,BTW it has hitachi controllers on it one hd44103 and many hd44102
 
G

Graham W

Jan 1, 1970
0
ahmed samir said:
hi there

i have been looking around for the datasheet or atleast the pinout for
this LCD module i got ,but no luck, ofcourse i asked at the store
where i got it ,but they have no clue

the lcd module is 40x1 lcd, with 20 pin cable-like the ide cable-and
header.

all the marking on it is:

Citizen japan, h2010h-tr


please help me i can't make any use of this module without it's pinout

ah,BTW it has hitachi controllers on it one hd44103 and many hd44102

When I looked at these LCD modules some time ago, I found that
they all had the same pinout whether they were 1 x 40 or 4 x 64.
So see if you can find some info on any serial data LCDs and compare
the pinouts.
 
A

andy

Jan 1, 1970
0
hi there

i have been looking around for the datasheet or atleast the pinout for
this LCD module i got ,but no luck, ofcourse i asked at the store
where i got it ,but they have no clue

the lcd module is 40x1 lcd, with 20 pin cable-like the ide cable-and
header.

all the marking on it is:

Citizen japan, h2010h-tr


please help me i can't make any use of this module without it's pinout

ah,BTW it has hitachi controllers on it one hd44103 and many hd44102

if you have a look at the linux lcd projects lcd4linux, lcdmod, or
lcdproc, you might find something there - i know there are pinouts for how
to attach a parallel lcd module to a PC parallel port.

(google on the project name plus linux lcd)
 
J

James Arthur

Jan 1, 1970
0
ahmed said:
hi there

i have been looking around for the datasheet or atleast the pinout for
this LCD module i got ,but no luck, of course i asked at the store
where i got it ,but they have no clue

the lcd module is 40x1 lcd, with 20 pin cable-like the ide cable-and
header.

all the marking on it is:

Citizen japan, h2010h-tr

please help me i can't make any use of this module without it's pinout

ah,BTW it has hitachi controllers on it one hd44103 and many hd44102


Cornucopia of info: http://www.eio.com/lcdintro.htm

Also, noticing that your uppercase letters seem to have run low,
allow me to donate a few spares:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
ABCDEFGHIJKLMNOPQRSTUVWXYZ

Feel free to use them in your posts.

James Arthur
 
Top