Maker Pro
Maker Pro

LeCroy oscilloscope screen problem

kittygraffiti

May 22, 2012
2
Joined
May 22, 2012
Messages
2
Hi everyone,

I have a LeCroy oscilloscope (9350) that used to work. Now it shows an orange band across the screen. I am not sure what this is and I can't make it go away. Can anyone help?

I have attached a picture for further demonstration.

Thanks in advance!
 

Attachments

  • IMG_0366.jpg
    IMG_0366.jpg
    139.2 KB · Views: 483

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
It certainly looks like a fault.

Have you tried to find a service agent for them? A 500MHz scope is probably worth repairing.

Unless you have experience with high voltages, I wouldn't advise you to try it yourself.
 

kittygraffiti

May 22, 2012
2
Joined
May 22, 2012
Messages
2
Well, I don't know, I am an engineer, I could probably give it a shot. I did work with high voltage for a year, but that might be in a slightly different context.

I was somewhat hoping it could just be a loose connection somewhere. I will try to find a service agent, I guess.
 
Top