Maker Pro
Maker Pro

LED driver

KWIK-RIPE

May 6, 2023
1
Joined
May 6, 2023
Messages
1
Recurring problem on a PID controller ,LED driver BP 9022a fails i think due to power fluctuations, cant source locally in RSA from reputable "bricks & mortar "company, can anyone suggest an equivalent even if pin-outs not same.?
 

Delta Prime

Jul 29, 2020
1,913
Joined
Jul 29, 2020
Messages
1,913
Quote from data sheet. "It uses patent pending source driver architecture and demagnetization sensing technology."
I don't know...looks pretty bulletproof to me.
Built-in 650 volt power mosfet
LED short and open circuit protection
CS resistor under short circuit protection.
VCC under voltage protection.
Thermally regulated.
Constant current control
Without secondary sense and feedback circuit.
Let's see how you hooked it up, do you have schematic?
I have the data sheet
 

Attachments

  • bp9022a_en_ds_rev_1.1.pdf
    523.9 KB · Views: 0
Top