Maker Pro
Maker Pro

led drivers

redfox26

Jan 28, 2015
1
Joined
Jan 28, 2015
Messages
1
hi


i have a battery of 14.4V and 10Ah.
i would like to use a led who accept 2.4A (12-V).


so i think i need to use a buck driver, because volt battery is higher then led one.


i will use maybe: H6Flex
http://www.taskled.com/h6flex.shtml


this driver support 7V to 25V and 6.6A (max)


6.6A is about the del who are 2.4 A or is about the battery i could use?
 

Arouse1973

Adam
Dec 18, 2013
5,177
Joined
Dec 18, 2013
Messages
5,177
Hello
That looks ok. The 6.6 A is the maximum current you can draw.
Thanks
Adam
 
Top