Maker Pro
Maker Pro

looking for a 12volt DC push/pull solenoid

davidbenjamindix

Feb 25, 2010
21
Joined
Feb 25, 2010
Messages
21
im trying to find a couple of decent 12volt DC push/pull solenoids. i don't have a ton of money to spend, so im asking for suggestions where i should look. i have a 12 volt motorcycle battery charger for the DC power source, and a 4 channel 12volt DC remote control which I plan on using for the on/off switch.
 

shrtrnd

Jan 15, 2010
3,876
Joined
Jan 15, 2010
Messages
3,876
I second that.
All Electronics Corp.
Van Nuys, CA.
They buy end-of-production materials, and sell them at very reasonable prices.
Have them put you on their mailing list, if they don't have what you want this month,
it might show-up there next month.
 

davidbenjamindix

Feb 25, 2010
21
Joined
Feb 25, 2010
Messages
21
i decided to use an actuator. the car mechanic ive been going to for a while wrote a note to himself. the next time he changes the actuators on a door lock/central lock system, he's going to give me the actuators/solenoids for nothing. that way i won't have to buy anything. yay.
 
Top