Maker Pro
Maker Pro

looking for a oscilloscope, budget is abt US$500

Y

Yoong Ping Lim

Jan 1, 1970
0
Hi all,

I have a budget of us$500. Looking for fft, digital, good value, etc
oscilloscope.

Any advice?

Was looking at the bitscope's, thinking of the 310n and 310u, which is
better?

Any other recommandations?
 
R

Rich Webb

Jan 1, 1970
0
Hi all,

I have a budget of us$500. Looking for fft, digital, good value, etc
oscilloscope.

Any advice?

Was looking at the bitscope's, thinking of the 310n and 310u, which is
better?

Any other recommandations?

Many of the digital "pocket o'scopes" or "PC o'scopes" have reasonable
analog bandwidths but relatively horrible sample rates. (Aside: I'd be
happy to be proven wrong. A decent scope that fits in the laptop bag
along with the rest of the junk would be A Good Thing.)

You really want a single shot sample rate at least 3x your highest
frequency of interest; 5x would be better. On the Bitscopes you mention,
their top-end sample rate is only 40 Msps, putting Nyquist at 20 MHz and
"nice looking waveforms" below 8 MHz.

Be wary of "equivalent sample rates" that rely on multiple sample passes
on repetitive signals to generate really big numbers.

From the specs you mention, I'd recommend Tek's TDS1002 (or its bigger
brothers in the TDS1000/TDS2000 series) or the HP/Agilent DSO3062A or
DSO3102A.

All about twice your stated budget, though.
 
Top