Maker Pro
Maker Pro

Looking for Agilent Infiniium 548XX software version A.04.36

J

JW

Jan 1, 1970
0
Hello,

I'm looking for version A.04.36 (or possibly later as long as your scope
is running Win95 or Win98) of the software. You can find out what version
you are using with a mouse connected to the scope by selecting Help, About
Infiniium from the tool bar. The three files I need can be found in the
\scope\bin folder of the hard drive; you may have to set windows explorer
to show hidden files to see them. The .exe files need all begin with
HP548.

The following scopes would be good candidates: 54810A, 54815A, 54820A,
54825A, 54845A. Agilent no longer supports these scopes, so I am unable to
get it from them.

This is the first version of the software that will work properly with the
infinimax probes and a 54845A if your acquisition board is part
#54845-66538. My scope currently has version A.04.30 (upgraded from
A.03.72.08) which is giving me problems saving the cal data - there's a
service bulletin on this problem which tells you to use version A.04.36

My email is 66gtojayw AT comcast.net
Thanks.
 
Top