Maker Pro
Maker Pro

Looking for flexiable light pipes and fiber optic cables for laser

S

sal

Jan 1, 1970
0
Greetings ALL

I have a 4mw laser pen that I would like to put a cap on so I can direct
the laser light
In the direction I choose.
Something like flexiable light pipes see link below
http://www.bivar.com/default.asp?p=products_detail&c=Flexible Light%
20Pipes&prid=FLPV-12.0-SG

The problem is:
1) the laser won't fit the fiber optic
2) the light at the other end of the fiber optic is not a pin point light
(like a laser),
the light ends up being more like a flashlight.

Any suggestions?


TIA
 
D

Dave

Jan 1, 1970
0
Hi again,
I mount my lasers in the center if a 2 in. plastic disk with 3 small
holes near the outside spaced 120 degrees. 3 screws in these small
holes to a fixes plane allows me adjust the beam to where I want it.
It's easy and cheap.
Dave
 
Top