Maker Pro
Maker Pro

looking for instructions to replace exit roller in personal laserwriter ntr

  • Thread starter motorcitymathnut
  • Start date
M

motorcitymathnut

Jan 1, 1970
0
several months ago i bought a complete roller assembly for another
printer and found the exit roller to be still in good shape -- now i
have to replace same in a personal laserwriter ntr yet i've misplaced
the instructions. which screws do i need to take off?

thank you for your time and trouble.

sincerely,



Richard
 
motorcitymathnut said:
several months ago i bought a complete roller assembly for another
printer and found the exit roller to be still in good shape -- now i
have to replace same in a personal laserwriter ntr yet i've misplaced
the instructions. which screws do i need to take off?

thank you for your time and trouble.

sincerely,



Richard

Try the folks at <http://www.printerworks.com/>. I'll bet they can
send you to a link of theirs with a pdf file for your LX engine. Best
wishes and good luck.
 
J

jakdedert

Jan 1, 1970
0
Try the folks at <http://www.printerworks.com/>. I'll bet they can
send you to a link of theirs with a pdf file for your LX engine. Best
wishes and good luck.
It might also be available online from fixyourownprinter.com. That's where
I downloaded the manual for my HP.....

jak
 
Top