Maker Pro
Maker Pro

Looking for OEM voltage controlled PSU module

F

FEEB

Jan 1, 1970
0
Hi,

does anyone know if there is an OEM voltage controlled PSU module
available out there?
I am looking for 0-20V/.5A output controlled by external voltage 0-10V.
The PSU would be a part of a larger outdoor experimental system, so an OEM
module would be ideal. I'd rather buy an off-the-shelf module than waste
my time on designing it.

Thanks in advance...

Frank


<[email protected]>
 
D

dlharmon

Jan 1, 1970
0
FEEB said:
Hi,

does anyone know if there is an OEM voltage controlled PSU module
available out there?
I am looking for 0-20V/.5A output controlled by external voltage 0-10V.
The PSU would be a part of a larger outdoor experimental system, so an OEM
module would be ideal. I'd rather buy an off-the-shelf module than waste
my time on designing it.

Thanks in advance...

Frank


<[email protected]>

How about a power opamp? Set the gain to 2.

One possibility (First thing on a parametic search of NSC parts):
LM675T
$2.75
TO 220
4000 mA current output
5.5 MHz gain bandwidth product
60 V maximum power supply voltage

Assuming you use a 24 V supply, maximum power dissipation (0V, 0.5A
out) would be 12W. You will need a heatsink. If you need to go all
the way to 0V a negative supply may be necessary. It should be
extremely simple. I don't know of any modules to do this, but it
should be quite simple.

Darrell Harmon
http://dlharmon.com
 
Top