Maker Pro
Maker Pro

Looking for replacement for the connector that plugs into bltouch

Hellmut1956

Aug 11, 2014
69
Joined
Aug 11, 2014
Messages
69
I have problems getting the connector that plugs into the BLTouch unit on my Creality Ender 5 Plus. On eBay or Amazon, I would have to spend 8 to 10 Euros. Usually, a problem I am asking you to help me with can be solved when knowing the correct name for the part. I would be looking for the connector with 5 cables attached to it as the connector is so small that I cannot solder cabels to it.

One of the cables of the connector, the red one of the five got broken. Here the pictures I made to show the connector:

20220917_173750.jpg20220917_173818.jpg20220917_173829.jpg
 

Martaine2005

May 12, 2015
4,921
Joined
May 12, 2015
Messages
4,921
That’s possibly a 5 pin micro JST connector.
You may have to measure the pin pitch or simply change both sides.

Martin
 

Hellmut1956

Aug 11, 2014
69
Joined
Aug 11, 2014
Messages
69
I did as you write, micro JDT 5 pins 1.25mm pitch. I did purchase this:

Here the Link to what I did buy and received:

Here is the link to what I did purchase after seeing it does not work

The pins and their pitch seem to be ok. but the other design of the connector did make inserting it impossible. Let us hope this will work I am buying it for the cables included.
 
Top