Maker Pro
Maker Pro

Looking for some transmitter receiver help

Mehuntr39

Dec 13, 2011
1
Joined
Dec 13, 2011
Messages
1
I have turned some manual bird launchers for dog training into remote using a PIE trigger a relay, car door lock actuator and 9 volt battery stuffed into a 4"x4" box I was using some cheap 2 way radios with a headphone jack as my receiver/transmitter. The problem with this setup is interference, I am looking for a transmitter that I can control 3 different launchers individually and receivers for each launcher that will run off of 9volts, they must also fit in my 4"x4" box.
 
Top