Maker Pro
Maker Pro

Low voltage to HV DC converters

Hi,

I am using Matsusada's Low Voltage to High Voltage DC converter. The
input range is from 1.5V to 12V which translates to 250 - 5000 VDC. I
am facing with some arcing issues on the high voltage side.

I will appreciate if someone can give me some pointers to eliminate the
arcing. Should I use a series resistance and on the output side before
connecting it to a voltage divider ( 1000 : 1) circuit for my feedback
loop ?

Any comments are most welcome.

Thanks,

Sandeep
 
Top