Maker Pro
Maker Pro

LTSPICE Help needed to make transformer coupled amplifier & push pull amplifier

Tasin

Dec 12, 2016
10
Joined
Dec 12, 2016
Messages
10
Thank you very much...Now I got it.... Can you please tell me from which signal I should take input & output signal by simulation?
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
The input is te 1kHz signal at the left.
Output is from the right transformer.
 

Audioguru

Sep 24, 2016
3,656
Joined
Sep 24, 2016
Messages
3,656
Both transformers have 40μH on one side and only 10μH on the other side of the center tap causing severe distortion instead of equal inductances on each side of the tap.
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Both transformers have 40μH on one side and only 10μH on the other side of the center tap causing severe distortion instead of equal inductances on each side of the tap.
Sorry I haven't noticed this issue. Of course Audioguru is right.
 
Top