S
siliconmike
- Jan 1, 1970
- 0
I have a pcb with 10 electrical gold plated contacts in a single line
with 5 mil isolation between them.
At any time, a small gold plated copper part "C" makes a very *light*
contact with only one of the contacts.
A *weak* force is responsible to move C over the range of contacts.
Is there some lubricant I can apply on the contacts to reduce the
friction between C and the contacts?
Please don't advise to change this setup as nothing can be changed, for
certain reasons.
Mike
with 5 mil isolation between them.
At any time, a small gold plated copper part "C" makes a very *light*
contact with only one of the contacts.
A *weak* force is responsible to move C over the range of contacts.
Is there some lubricant I can apply on the contacts to reduce the
friction between C and the contacts?
Please don't advise to change this setup as nothing can be changed, for
certain reasons.
Mike