D
DIAMOND Mark R.
- Jan 1, 1970
- 0
I posted this initially to one of the other newsgroups, and someone kindly
suggested that this was probably a better forum...
This will sound very strange, I know, but I need to be able to display
images in a situation where the display surrounds a tube about 8mm in
diameter. Constructions with back-projection and so forth are probably
possible, but I wondered about using a flat panel display. Unfortunately, I
don't know enough about the construction of flat panel displays to answer my
own question which is ...
Can one bore a hole (laser cutter, diamond drill or anything else) through a
flat panel display and still have the intact part of the display working ...
or will the hole destroy the electrical connections to other parts of the
screen?
Cheers,
suggested that this was probably a better forum...
This will sound very strange, I know, but I need to be able to display
images in a situation where the display surrounds a tube about 8mm in
diameter. Constructions with back-projection and so forth are probably
possible, but I wondered about using a flat panel display. Unfortunately, I
don't know enough about the construction of flat panel displays to answer my
own question which is ...
Can one bore a hole (laser cutter, diamond drill or anything else) through a
flat panel display and still have the intact part of the display working ...
or will the hole destroy the electrical connections to other parts of the
screen?
Cheers,