M
[email protected]
- Jan 1, 1970
- 0
I live out in the boonies and it's hard to get decent Radio stations,
especially since I live in a home with metal siding and roofing. I
dont want to spend anything on this project, just use some of the odds
and ends I got laying around, and plan to put this on a board and
mount it outside with coax coming in the house.
I found the simple plans on this website.
http://www.northcountryradio.com/Articles/fmdip.htm
The only problem is that I dont have any of those ferrite rods or
toroids. However, I got one of those outdoor converter devices for tv
antennas that have 2 spade clips on the wires on one end, and a coax
connector on the other. (made to convert a tv antenna to coax). Can
I just hook the two wires from this converter to the two home-made
antenna wires and run my coax into the house?
And, just for the heck of it, I have an old busted tv antenna. Would
it work to use 2 of the "rods" from the antenna (length as shown in
the website), and screw them to a piece of plaxiglass in the middle as
an insulator? That way I can mount it on a nearby tree.
Thanks all
especially since I live in a home with metal siding and roofing. I
dont want to spend anything on this project, just use some of the odds
and ends I got laying around, and plan to put this on a board and
mount it outside with coax coming in the house.
I found the simple plans on this website.
http://www.northcountryradio.com/Articles/fmdip.htm
The only problem is that I dont have any of those ferrite rods or
toroids. However, I got one of those outdoor converter devices for tv
antennas that have 2 spade clips on the wires on one end, and a coax
connector on the other. (made to convert a tv antenna to coax). Can
I just hook the two wires from this converter to the two home-made
antenna wires and run my coax into the house?
And, just for the heck of it, I have an old busted tv antenna. Would
it work to use 2 of the "rods" from the antenna (length as shown in
the website), and screw them to a piece of plaxiglass in the middle as
an insulator? That way I can mount it on a nearby tree.
Thanks all