N
N_Cook
- Jan 1, 1970
- 0
I usually use a 1000:1 divider with 300M ohm loading but I notice my other,
bigger Tektronix one, is 100 Meg. Is there a standard impedance for
monitoring the output of self-contained generators that may be used in
anything requiring high voltages.
The 40KHz one in front of me is 33V dc supply and label says 5.55KV , 0.3mA
output, but to measure that and state for general purpose use, there must
surely be some standard load for the monitoring.
bigger Tektronix one, is 100 Meg. Is there a standard impedance for
monitoring the output of self-contained generators that may be used in
anything requiring high voltages.
The 40KHz one in front of me is 33V dc supply and label says 5.55KV , 0.3mA
output, but to measure that and state for general purpose use, there must
surely be some standard load for the monitoring.