Maker Pro
Maker Pro

Measuring Impedance of a wall socket

J

JeffM

Jan 1, 1970
0
I'm not just looking...to understand the concept.
cyrille perron

Note1: When posting the same question to multiple groups,
pit ALL the groups on the Subject line.
This is called cross-posting.

Note2: This is hardly a proper question for sci.electronics.design.
..
..
Measure the circuit unloaded, then loaded.
Calculate the voltage divider.

View in monospaced font like Courier.

maybe a few ohms

_____/\/\_____
|
/
\ 10Mohn
/ instrument
\
______________|



maybe a few ohms

_____/\/\____________________
| |
/ /
\ known \ 10Mohm
/ load / instrument
\ \
______________|______________|
 
C

cyrille perron

Jan 1, 1970
0
Hi, I was wondering if anyone could help me with a curious question. How
would one go about measuring the impedance of a wall socket? Assuming it is
120V, of course. I'm not just looking for a formula but rather to
understand the concept. Any websites or other resources would be
appreciated. Thanks in advance.
 
R

Rich Grise

Jan 1, 1970
0
Hi, I was wondering if anyone could help me with a curious question. How
would one go about measuring the impedance of a wall socket? Assuming it is
120V, of course. I'm not just looking for a formula but rather to
understand the concept. Any websites or other resources would be
appreciated. Thanks in advance.

Don't multi-post. If you're posting the same question to more than one
group, cross-post. To crosspost, just put the names of all of the NGs
that you're crossposting to in the "newsgroups" header field.

Well, this guy explains it better than I can:
http://www.cs.tut.fi/~jkorpela/usenet/xpost.html

And, in answer to your question, in theory, the impedance of a wall
outlet should be zero. To measure it, stick a voltmeter across the
mains, and turn on a light. If the voltage changes, you have an
impedance that shouldn't be there.

Good Luck!
Rich
 
M

mike

Jan 1, 1970
0
Rich said:
Don't multi-post. If you're posting the same question to more than one
group, cross-post. To crosspost, just put the names of all of the NGs
that you're crossposting to in the "newsgroups" header field.

Well, this guy explains it better than I can:
http://www.cs.tut.fi/~jkorpela/usenet/xpost.html

And, in answer to your question, in theory, the impedance of a wall
outlet should be zero. To measure it, stick a voltmeter across the
mains, and turn on a light. If the voltage changes, you have an
impedance that shouldn't be there.

Good Luck!
Rich

I tried your experiment.
I got 117.9V with the light off and 117.2 with it on.
Should I start ripping out my defective wiring?
FWIW there ain't no such thing as zero.
mike

--
Return address is VALID but some sites block emails
with links. Delete this sig when replying.
..
Wanted, PCMCIA SCSI Card for HP m820 CDRW.
FS 500MHz Tek DSOscilloscope TDS540 Make Offer
Wanted 12" LCD for Compaq Armada 7770MT.
Bunch of stuff For Sale and Wanted at the link below.
MAKE THE OBVIOUS CHANGES TO THE LINK
ht<removethis>tp://www.geocities.com/SiliconValley/Monitor/4710/
 
Top